Women’s waterproof mountain walking jacket MH100

märke Quechua

Storlek L (motsvarande 40-42)
helt ny och oanvänd.
………..

Beskrivning enligt decathlons hemsida:

waterproof
100% taped seams. 2-layer coating withstands a 5000 mm water column

breathability
20-cm side openings and perspiration-wicking component (RET = 12)

anatomic design
Removable & adjustable hood Adjustable cuffs.Tightening cord at bottom of jacket

Cut
This jacket has a cut that fits all shapes while still looking very feminine. A warm layer, such as a fleece or light jumper, can be worn underneath. Inner lining can also provide more comfort.
You can choose your usual size, or a size above if you don't want it to be worn fitted.

Removable hood
The hood can be removed thanks to the press studs. Its height can be adjusted using an elasticated cord, and its depth adjusted using a Velcro tab located at the back of the hood.

CONSTRUCTION OF THE JACKET
This jacket is constructed with 2 coated layers, including a mesh lining (large mesh lining)
‘2 layers’ means there is the outer fabric and the lining.
A coating is applied to the inside of the fabric, it is similar to a resin that makes the component waterproof, while remaining breathable. The inner lining of the jacket has the role of protecting this coating

Waterproofness test
Waterproofing is measured by a fabric’s resistance to water pressure expressed in mm of water column (JIS 1092 standard).
The higher the water pressure, the more waterproof the fabric.
The component of this product has a waterproof rating of 5000 mm, i.e. it can withstand the pressure exerted by a 5000 mm column of water.
This is also equivalent to 5 000 Schmerbers.

Breathability test
Component breathability is measured by its thermal evaporative resistance (RET).
This is its capacity to let water vapour generated by the body during physical activity escape and therefore avoid water accumulating on the skin.
The lower the RET, the more breathable the fabric.

RET = 6: very breathable fabric
RET = 12: breathable fabric
RET = 20: little breathability

Our product has a 12 RET rating

How do I restore my jacket's water-repellent properties?
The water-repellent property of a fabric is its capacity to make water run off its surface without absorbing it. This prevents the fabric from soaking up water and keeps it lightweight and breathable. The fabric is made water-repellent by treating its outer surface, however this property may deteriorate with use.

https://www.decathlon.co.uk/p/women's-waterproof-mountain-walking-jacket-mh100/_/R-p-172374?mc=8492378