Jag har även andra liknande, se mina övriga annonser.

Du kan kontrollera både värme och kyla med denna termostat. 240V. Med sensor.
DescriptionSTC-1000 Temperature Controller Thermostat is a temperature measurement and Controller tool with high accuracy and precision at a very low cost. It offers a high-temperature control precision of 0.1?. The control range from -50? to 99?. The LED display shows the results clearly. One can directly install or embed the STC-1000 in industrial control equipment panel, convenient and quick.
Features:Seamlessly switch between the modes (between cool and heat).Heat is controlled by setting the value and the difference value.Manual temperature calibration is available.Refrigerating control output delay protection is built-in.An alarm outputs a warning sound when the heat exceeds the temperature limit or when the sensor outputs error.Specifications:Measuring range: -50 – 99°C.Resolution : 0.1°C.Accuracy : ±1°C (-50 – 70°C).Sensor error delay: 1 minute.Supply: 220VAC±10%, 50/60HzConsumption: =3W.Sensor: NTC sensor (1PC).Relay contact capacity : Cool 10A/250VAC;Heat 10A/250VAC.Ambient temperature : 0 – 60°C.Storage temperature : -30 – 75°C.Relative humidity : 20% – 85% (No condensate).Front panel size : 75(L) x 34.5(W)(mm)Mounting size: 71(L) x 29(W)mm.Probe Length: 1m (include the probe).Size: 75(L) x 34.5(W) x 85(D)mm.Package Includes:1 x STC-1000 220V Digital Thermostat Temperature Controller

DescriptionReport Item1.
Temperature measuring range: -50 ° C ~ 99 ° C

2.Resolution: 0.1 ° C;

3.Accuracy:+- 1° C (-50 ° C ~ 70 ° C);

4.Sensor error delay: 1 minute

5.Power supply: 110-240VAC 50/60Hz

6.Power consumption: <3W;

7.Sensor: NTC sensor (1PC);

8.Relay contact capacity: Two Relay Cool 10A/220VAC; Heat 10A/220VAC;

9.Ambient temperature: 0 ° C ~ 60 ° C;

10.Storage temperature: -30 ° C ~ 75 ° C;

11.Relative humidity: 20% ~ 85% (No condensate)

12.Sensor length: 1.0m

13. Front Panel Size: 75x34.5mm ; Product Size: 75x34.5x85 mm ; Mounting Size: 71x29mm

Menu Instruction:

Code Function Set Range Default

F1 Temperature set value -50.0~99.9°C 10.0°C

F2 Difference set value 0.3~10.0°C 0.5°C

F3 Compressor delay time 1~10 minutes 3 minutes

Vid samfrakt meddela mig så ordnar jag det.

F4 Temperature calibration value -10.0°C~10.0°C 0°C